Help Center · 🎙 Creating & Capturing

The Beat Maker: make a beat, free

Beginner · 9 min read

The Beat Maker in Studio is a drum machine on every plan: 8 tracks, 3 kits, 10 grooves, 10 templates, LED pads with a velocity, nudge and length per step, time signatures, live record, a mixer with meters and choke groups, unlimited undo and snapshots, and TRAX Sounds on any track. Download the WAV, save it, share it to Best Beats, make a TikTok video.

Open Studio → Beat Maker (or New Beat on the Studio page). It's on every plan, free. Pro Studio adds patterns C and D, effects on every track, automation, song mode and the piano roll.

The transport bar

Along the top, always in view:

  • ▶ plays and stops, ● records (see Live record), Loop repeats the pattern (or the chain; off: it plays once and stops).
  • Metronome clicks on the beats, with its own volume. Count-in: none, 1, 2 or 4 bars of clicks before recording.
  • The tempo (60 to 180 BPM): drag it up or down, use the arrow keys (Shift: 10 at a time) or the mouse wheel. Tap in time to set it (hold Shift while tapping for half-time).
  • Time: 4/4, 3/4, 6/8, 5/4 or 7/8. The pads mark each bar and beat for it.
  • The clock shows where it's playing: bar.beat.tick.
  • Patterns A, B, C, D (C and D on Pro Studio). Chain plays the patterns that have steps, one after another.
  • ↶ ↷: undo and redo.

The pads

  • 8 tracks: Kick, Snare, Clap, Open HH, Closed HH, Tom, Perc and Crash.
  • Tap a pad to turn it on (medium) or off. Drag across pads to paint them, with as many fingers as you like.
  • A pad's brightness is its velocity: dim is soft, bright is loud, amber is hard. The column that's playing lights up.
  • Hold a pad (or right-click it) for its menu: Velocity (1 to 100%), Nudge (up to half a step early or late) and Note length: Full (the sound rings out, as before), 1/32, 1/16, 1/8 or 1/4. A long note shows a tail. Pro Studio's pitch bend, flam, reverse and filter are on the way.
  • M mutes a track, S solos it. Tap a track's name to hear it.
  • 8 to 40 steps a pattern, depending on the time signature. On a phone the pads show 4, 8 or 16 at a time, with page buttons; + and − make them bigger or smaller.

Grooves and templates

  • Groove: Straight, Shuffle, Lazy Pocket, Trap Bounce, Boom Bap Pocket, Lo-Fi Dust, Drill Slide, MPC 60 Classic, Linn Groove or Dilla Swing. Each sets the swing and humanize and gives every 16th its own level and push, without changing your pads, so you can try them all.
  • Swing (0 to 75%) pushes every second 16th later; Humanize (0 to 25%) adds a little timing and strength variance, the same every play.
  • Start from template: Blank, 808 Trap starter, Boom Bap pocket, Lo-Fi chill, Drill bounce, House 4-on-floor, Afrobeats, Reggaeton, Phonk or Jersey Club. Each puts a starter pattern on A with a matching kit, tempo and groove. Undo brings back what you had.
  • Copy to puts the pattern on the next one; Clear empties the one you're on.

The mixer

Each track has a level meter, its volume, pan and a choke group (1 to 8: tracks in the same group cut each other off, like a closed hat cutting an open one; the hats start in group 1). The master has a stereo meter, its volume and a limiter that keeps the WAV from clipping. FX opens a track's effects on Pro Studio (below).

TRAX Sounds on your tracks

Press 🎚 Sounds for the TRAX Sounds drawer beside your pads (from the bottom on a phone).

  • All: search (*808*, *trap kick*, *jazz piano*, *432Hz pad*), pick a shelf, a tempo (like *90-110*) and a key, sort by shelf or Newest, and tick No credit needed for sounds that don't ask for one. With nothing typed, this week's most used come first. My Sounds: the ones you saved. Browse: the shelves, CymaTones Frequency among them. Badges show a sound's license (Public domain, CC0, CC BY with its credit) and CymaTones Frequency ✦.
  • ▶ plays a sound; with a mouse, resting on one plays 2 seconds of it.
  • Create with this puts it on your first empty track. ▾ for Add to track… (pick which), the Vocal Booth, Layers, Master or Save to My Sounds. On a phone, Add to track picks the track too.
  • With a mouse, drag a sound onto a pad (it goes on that track and turns that step on), onto a track's name (that track), or anywhere on the pads (the first empty track). All 8 in use? It asks before it replaces one.
  • The track takes the sound's name. In the mixer, Kit sound puts the kit's sample back.
  • Keys on a highlighted sound in the drawer: C puts it on your beat, S saves it to My Sounds, Enter plays it, the arrows move up and down, Esc closes the drawer.

A sound from a pack above your plan shows the 🔒 with the plan that opens it. A sound you open with Create with this on the TRAX Sounds page lands here the same way; if you have a beat going, you choose Add to current beat, Start fresh or Cancel.

Pro Studio: effects, automation, song mode, the piano roll

  • Effects on every track. FX on a track's strip: up to 4 effects, in order: Reverb (hall, plate, room), Delay (ping-pong, dub, slap; its time in 16ths, so it follows the tempo), Filter (low-pass, high-pass, band-pass, with resonance), Compressor, Drive (saturation, drive, distortion), Bitcrusher, Chorus, Phaser and a 3-band EQ with a Q for each band. Each one: on or off, Wet (how much of it you hear), 3 presets and its settings; ↑ ↓ change the order. Tap an effect to add it, or drag it onto any track's strip.
  • Automation. Automation under the pads: pick a track (tap its pad, or 1 to 8) and what moves: Volume, Pan, Filter cutoff or Reverb send (a plate reverb every track can send to). Drag across the steps to draw it (higher is more). A drawn step holds until the next one you drew (shown faint); before the first drawn step the track plays as it's set (striped). Rub out (or Alt, or a right-click) takes steps out, and Clear empties the lane. From the keyboard each step is a slider: the arrows move it, Delete takes it out. The same lane plays in every pattern.
  • The piano roll. Piano roll, then Melody mode for the track you picked: its sound plays as notes over two octaves (its own pitch in the middle). Tap a square for a note (the length you picked), tap a note to change its length, velocity and bend (it slides up to 12 semitones by the note's end: an 808 slide), or take it out (or double-tap it); Shift-tap stretches it. From the keyboard: the arrows move, Enter places or chooses, Delete takes the chosen note out. Notes on the same step make a chord. Each pattern has its own notes (up to 256 a track); the track's row shows where they start, and tapping it opens the roll. Turn melody mode off and its pads come back. A template starts melody mode and the song over.
  • Song mode. Song: pick a pattern (or Rest) and tap the slots, up to 64; each slot plays one pattern through (a rest is that long a silence). Start from the chain copies the chain. Play the song plays it in place of the chain, from its first slot (the status bar says Song). Download the song (WAV) makes the whole song once through, its last notes and effects left to ring out; a file can be up to 4 and a half minutes.

The WAV, Save to Captures and Share link play all of it. On another plan these show PRO; a beat opened there plays without them, and saving it there leaves them out.

Undo and snapshots

Undo and redo go back as far as you like while you work (Ctrl Z, Ctrl Shift Z). Every 10 changes are kept as an Auto snapshot, and Snapshot keeps one with a name. Restoring a snapshot keeps what you had in undo, so nothing is lost.

Live record

Press ●. After the count-in, play the pads (tap a track's name, or the keys Z X C V N M , .; Shift for hard, Alt for soft) and each hit lands on the beat. Quantize sets where: the nearest 1/16, 1/8 or 1/4, or Off to keep your timing (it's kept as the step's nudge).

Your Dawg

Your Dawg sits at the bottom with a tip for where your beat is: start with the kick on 1, 5, 9 and 13, add a snare, then hats, then pattern B, then the chain. Tap it for the Smart Dawg Coach. The status bar beside it shows the pattern, how many steps are on, the engine's load, whether it's saved, and your last change with Undo.

Keep it

  • Save keeps it in My beats (Studio → Beat Maker → My beats). Your beat is also kept on this device as you work, so a closed tab never loses it.
  • Download WAV: 16-bit, 44.1 kHz, at least 4 bars, made to loop with no gap.
  • Save to Captures puts the WAV in your Captures, ready for Create, the Vocal Booth or a listing.
  • Share link makes a public page for the beat (8 bars or more) that anyone can hear, no account needed, and puts it up for Best Beats. Its name is checked before it goes public. Once it's shared, Download for TikTok, Download for Reels and Download audio only show under it.
  • Theme: Dark, Light or Midnight, remembered on this device.

Keys

Space plays and stops · 1 to 8 pick a track · R records · S or Ctrl S saves · Ctrl E downloads the WAV · Ctrl Z undoes, Ctrl Shift Z redoes · A, B and D pick a pattern, [ and ] move through them (C is the Clap pad) · + and − nudge the tempo · Z X C V N M , . play the pads (Shift: hard, Alt: soft) · on a pad: Delete clears it, the menu key (or Shift F10) opens its menu. Space plays and stops unless a button has the focus.

On Android, pads buzz when you tap them; turn it off with Vibrate on tap. iPhones don't vibrate for websites.

Still stuck?

Search the Help Center, read the FAQ, or contact support. New to TRAX? Start free. A member? Log in to come back here with the full Help Center.