Help Center · 🎙 Creating & Capturing
Learning Mode and your skills
Beginner · 4 min read
A ? beside the controls in Create explains each idea (what it is, why it matters, something to try). Your Skills page shows the ideas you've met and what to learn next.
TRAX teaches you as you make music. With Learning Mode on (it starts on), a small ? sits beside the controls in Create:
- Tempo and Key at the top;
- Vol and Pan on your first track;
- Auto-quantize in a track's tools;
- under Effects, the ideas a preset uses (for example compression, EQ and reverb), each with its own ?;
- in Shape it yourself (under Effects): the full effect rack. Add, reorder and remove effects, turn every knob, and save your own presets. Each effect has its ?, and each knob says in one line what turning it does.
Tap a ? to see what the idea is, why it matters, and something to try right now. Nothing changes until you choose: the explainers never touch your track.
The mixer and "Too loud"
Press 🎚 Mixer (beside the master meter in Create) to see every track as a channel strip: its level fader, pan, mute and solo, how loud it is right now, and how many effects it has. The Master strip shows the whole mix.
Each strip also has two sends: Space (a shared room reverb) and Echo (a shared echo that follows your tempo). Turn them up to send some of that track into the shared effect: one space for the whole song glues the parts together. Tap the ? by Sends to learn more.
A safety ceiling sits on the master: it leaves a normal mix untouched and rounds off anything that would hit the top, so you don't get digital crackle, in playback or in what you export. If the mix hits the top, ⚠ Too loud appears (it opens the mixer): pulling the loudest faders down a few dB sounds cleaner than leaning on the ceiling. Tap the ? there to learn about clipping.
Mix check
Press ✦ Mix check (beside the Mixer in Create), then Check my mix. TRAX plays your sketch silently in the background, the whole mix and then each track, and listens for:
- a mix that hits the top (or is very quiet);
- one track much louder than the rest;
- parts other than bass and drums crowding the low end;
- a muddy middle (too much around 250 to 500 Hz) or a harsh top (2 to 6 kHz);
- reverb washing things out;
- every track stacked in the center.
Mix checks a day: 5 on $1 Supporter, 500 on Pro Studio (Starter Free has Mix moves, below; Mix check comes with $1 Supporter). They start fresh at midnight UTC.
You get up to five suggestions. Each says what to try, why (what it heard) and the idea behind it, with Learn more. Nothing changes until you press its button. It works on your tracks as they are right then, and each has its own Undo, which puts back only what that suggestion changed, even when another suggestion changed the same setting after it. With two or more suggestions, Try all applies them in one step (and Undo all takes them all back). Listen, keep what you like, and check again.
Mix moves
Under Mix check are ten mix moves, each a whole look in one click: Make it louder, Add warmth, Make vocals clearer, Vintage sound, Modern pop, Lo-fi vibe, Trap, EDM festival, Acoustic intimate and Cinematic. Tap one to see exactly what it will change on which tracks (for example "“Chords” and “Melody”: Space at least 20%"; anything already in place isn't listed), why it works and the idea behind it. Nothing changes until you press Try it, and you can press it while your loop plays to hear the difference.
Moves work out which track is which: drums (including drum samples and loops), bass (or an 808), vocals, and everything else. Make vocals clearer needs a vocal track. Each move has its own Undo, which takes back only what that move changed; if you've since changed one of those settings yourself, your change stays. You can stack moves (Lo-fi vibe, then Add warmth) and undo them in any order: the others stay exactly as they were. A move's Undo lasts while Mix check is open; after you close it, the studio's ↶ still steps back.
Learning as you go
The first time you use something (move the tempo, change the key, set a volume or pan, quantize, or pick an effect), a small note appears: "You just used…" with one line about it. Press What it does for the full explainer, or Got it (it also goes by itself). Each note shows once on this device, only while Learning Mode is on.
Your skills
Your skills (in the Academy) shows:
- how many of the ideas you've met, by level (beginner, intermediate, advanced);
- Next to learn: a few ideas picked for where you are, beginner ideas first and close to what you already know;
- every idea, grouped (rhythm and time, notes and harmony, sound, mixing, finishing), each with its explainer.
An idea counts as met when you open its explainer, in Create or on the Skills page. Your skills are yours only and go with your account.
Turning it off
Switch Learning Mode off on the Skills page for a cleaner screen in Create. It's remembered on this device, and every explainer is still on the Skills page.
Related articles
Still stuck?
Search the Help Center, read the FAQ, or contact support. New to TRAX? Start free. A member? Log in to come back here with the full Help Center.
