Help Center ยท ๐ Creating & Capturing
Spin Sampler: scratch and mix any sound
Beginner ยท 9 min read
Two decks and a mixer in your browser (four on Label Enterprise and White Label). It opens with a loop already playing: scratch it, put any sound on a record, mix the decks with the crossfader, then record what you hear and save it to Captures or as a WAV. Brake, backspin and echo-out on Pro Studio and up.
Spin Sampler is a DJ setup in your browser: turntables side by side and a mixer between them. It never starts silent: Deck A opens with a sound looping, so you can scratch the loop that's already playing straight away (see How Spin Sampler always has music). Put a sound on each record and move it with your hand, the way a DJ does. Pitch and speed change together, and pulling a record back plays it backwards, like real vinyl. The crossfader blends one deck into the other, and the recorder keeps exactly what comes out of the mixer.
Your decks
- Producer Starter and Pro Studio: 2 decks, A and B.
- Label Enterprise and White Label: 4 decks, A to D.
On a computer the decks sit side by side (four make a 2 ร 2 grid) with the mixer underneath. On a phone held upright they're stacked: Deck A, then the mixer, then Deck B, so the crossfader sits between the two records (with all four decks showing, it's A, B, the mixer, then C and D). Turn the phone sideways and the decks go side by side.
Four decks: show two at a time
With four decks, the bar above them chooses what's on screen: All 4 decks, A + B or C + D. The decks you can't see keep playing (they're listed in the bar, and tapping one switches to its pair). On a phone, Spin starts with A + B; swipe sideways on a deck (not on its record, which scratches) to move between A + B and C + D. Spin remembers your choice in this browser. On a device with 4 processor cores or fewer, or 4 GB of memory or less, Spin suggests two at a time if the sound crackles.
Put a sound on a deck
Each deck has its own list:
- TRAX Welcome Loops: 15 eight-bar loops at 120 BPM (Boom Bap, Lo-Fi Chill, House 4/4, Trap 808 and more). They loop with no gap.
- Your captures: any audio capture.
- Create tracks: voice, imported and sample tracks from your sketches.
- TRAX sounds: the 18 TRAX Original Sounds (kicks, snares, claps, hats, toms, cymbals).
- Instrument Library: any instrument, played as a short phrase onto the record.
- Your fileโฆ: a sound from your device. It's played in your browser and never uploaded.
To open a capture straight on Deck A, go to /music/spin/ followed by the capture's id.
Spin it
- โถ Start turns that deck's motor on: 33โ rpm, the sound as recorded.
- Drag the record clockwise to push it forward (faster and higher), or the other way to pull it back (it plays backwards). Hold it still and the sound stops, like a hand on vinyl.
- Let go and the motor pulls it back up to speed.
- โ Stop brings the platter to a quick stop. โฎ Cue moves the needle back to the start.
- ๐ Loop plays the sound round and round (on for Welcome Loops). ๐ Mute silences the deck while it keeps turning.
- The number next to the deck's name shows its speed, from โ8ร to +8ร.
Pitch and tempo
- Pitch speeds a deck's motor up or slows it down by up to 8%, like the pitch fader on a club turntable. The number beside it shows how far (for example +2.4%). Double-click the fader, or press Reset pitch, to go back to 0. It stays where you left it when you change the sound.
- BPM shows the tempo you're hearing, with the pitch included. Welcome Loops are 120 BPM exactly. For other sounds TRAX makes a best guess from the sound itself and shows it with โ (for example โ 98 BPM). It can land on two-thirds or half of the real tempo with swung or half-time beats, so tap to set it exactly. A sound without a steady beat (a single hit, a pad) shows. BPM.
- Tap along to the beat, four times or more, to set the tempo yourself. It replaces the BPM shown until you change the sound.
- To line two decks up, set both to the same BPM with their pitch faders.
On a phone, use one finger on a record. On a computer, drag with the mouse, or click a record and use the keyboard: Space starts and stops it, hold โ to pull it back and โ to push it forward.
Moves (Pro Studio and up)
Every deck has them:
- ๐ Brake cuts the motor and lets the record wind down slowly, the classic tape-stop sound.
- โบ Backspin flings the record backwards and lets it coast to a stop.
- ๐ Echo out stops the record, and what was just playing echoes out every โ of a second for 3 seconds.
The mixer
- A fader for each deck: how loud that deck is in the mix. The bar under it shows the deck's level as it plays.
- EQ for each deck: Hi, Mid and Low, from โ24 dB ("off": that part of the sound all but gone) to +6 dB. Pull Low down to take out a loop's kick and bass, Hi to take out the hi-hats. Double-click a band, or press EQ flat, to set it flat again.
- Solo: hear only that deck (solo more than one to hear just those). The other decks keep turning, silent, until you press Solo again.
- The crossfader: by default, all the way left plays only Deck A (A and C with four decks), all the way right only Deck B (B and D). In the middle you hear both at the same overall loudness. Center the crossfader puts it back in the middle; double-clicking it does the same.
- Crossfader: Left / Off / Right on each deck chooses which side of the crossfader that deck is on. Off means the crossfader doesn't touch it: it plays at its fader's level wherever the crossfader is. The letters at each end of the crossfader follow your choice.
- Master: the volume of the whole mix (70% when Spin opens; it remembers your last setting), with its own level bar. Loud peaks are held just below full scale, so several decks at full volume don't distort. ๐ Mute all silences the mix while everything keeps playing, and โ Clear decks takes every sound off.
Record the mix
- Press โ Record, then perform: start decks, scratch, ride the faders, throw the crossfader.
- Press โ Stop recording, or ๐ Echo out to end with an echo: every deck that's playing echoes out, and the take keeps the 3-second tail.
- Your take is exactly what came out of the mixer: every deck, the faders, the crossfader, the EQ, the pitch and your moves. โถ Play the take to listen. If nothing was playing, TRAX tells you the take is silent.
- โ Save to Captures keeps it as a new capture named after the decks you played with their fader up (for example "Rhodes + Piano (spin)"), ready for a Create sketch or a project. โค WAV downloads it. Discard throws it away.
A take can be up to 5 minutes long. Captures holds files up to 50 MB, about 4ยฝ minutes of a stereo take; a longer take downloads as a WAV instead. While you're recording, the sounds on the decks can't be changed, and Record waits until a sound that's still loading is ready.
Try it without an account
Anyone can try Spin Sampler at /music/try-spin, or with โถ Try it live on the TRAX home page, with no signup:
- Two decks and the mixer, with brake, backspin and echo-out unlocked. Deck A opens playing the Boom Bap Welcome Loop; the TRAX Spin Break, a TRAX Original loop, is in the list.
- Your fileโฆ plays a sound from your device (up to 10 MB and 60 seconds). It's decoded in your browser and never uploaded.
- Record up to 1 minute and play it back right there.
- Saving needs an account. ๐ Sign up to save and ๐ Sign up to download open the trial signup (or Request access while trials aren't open yet). The demo never keeps, uploads or downloads your take: it stays in that tab and is gone when you close it. Once you're in, Spin Sampler opens fresh with the same Welcome Loops, and everything you make there is yours to save.
- Share the demo with friends: X opens a post with the demo's link; TikTok and Instagram copy a caption with the link; or copy the link.
- A mix kept in a browser by an earlier version of the demo is still offered at your next sign-in there: Add to my Captures or Not mine: delete it.
Nothing you do in the demo is stored by TRAX. If you're not signed in, visits and demo use are counted anonymously, with no cookies.
Plans
| Producer Starter | Pro Studio | Label Enterprise | White Label | |
|---|---|---|---|---|
| Decks + mixer + crossfader | 2 | 2 | 4 | 4 |
| Spin + scratch | โ | โ | โ | โ |
| Saves (to Captures or WAV) | 5 a month, mono | Unlimited, stereo | Unlimited, stereo | Unlimited, stereo |
| Brake, backspin, echo-out | โ | โ | โ | โ |
| Pitch + BPM, EQ, Solo, crossfader assign | โ | โ | โ | โ |
| Four-deck battle view | โ | โ | โ | โ |
Saves are counted from the first of each month (UTC).
Something your plan doesn't include shows a ๐. Press it (or a grayed Deck C or D) to see what the plan that has it adds, with a link to compare plans. Nothing changes until you choose to.
Privacy
The decks and the mixer run in your browser. Captures and Create tracks are read from your private storage over short-lived links, and a file you pick from your device stays on your device. When you save a take, TRAX keeps what was on each deck (for a file, only its name), the mixer's settings and the take's length. The audio itself is only uploaded when you save it to Captures; a WAV download stays on your device. See Trust.
Related articles
Still stuck?
Search the Help Center, read the FAQ, or contact support. New to TRAX? Start free. A member? Log in to come back here with the full Help Center.
