Help Center · 🎙 Creating & Capturing
TRAX Layers: combine anything into a finished track
Beginner · 11 min read
Layers in Studio is a multitrack timeline on every plan. Stack beats, vocal takes, TRAX Sounds and your own files (WAV, MP3, FLAC, M4A, OGG up to 100 MB), record straight onto armed tracks, trim, fade, split, reverse, stretch to the grid, mix in the Mixer view, export a WAV or MP3, make a TikTok cut, share a link that plays in the browser, or sell it on the Marketplace. Pro Studio adds effects, automation lanes, clip effects, a reference track to compare with, pitch shift, the master's compressor and EQ, stems and 48 kHz 24-bit masters.
Open Studio → Layers. It's on every plan. Starter projects hold 8 tracks and 500 MB of your own files, Supporter 16 tracks, Pro Studio as many as you need.
Start a project
Pick a template: Blank (4 empty tracks), Song structure starter (intro, verse, chorus, verse, chorus, bridge, chorus, outro marked on the timeline), Beat + vocal, Full band, Podcast or Beat with FX layer. Name it now or later. Layers opens the project you had open last; My projects lists them all with a thumbnail, how long each runs, its tracks and when you last opened it.
Bring audio in
- + Add audio: your Captures (Vocal Booth takes, beats you saved to Captures, earlier uploads).
- TRAX Sounds: the Sounds drawer. Add any sound to a track.
- Upload, or drop files anywhere on the timeline: WAV, MP3, FLAC, M4A or OGG, up to 100 MB each. Layers reads each file's tempo, key, length and waveform. A dropped file lands on the track and beat you drop it on.
Add to Layers from anywhere
Look for Send to Layers across TRAX:
- Beat Maker: beside Save to Captures (the whole song when song mode is on). In My beats, every beat has it too.
- Vocal Booth: Send take to Layers on the take you picked (it's kept first, as Save to Captures does), and on every kept take in the list.
- TRAX Sounds: in Create with this ▾, Open in Layers (a new project) and Add to current Layers project.
- Best Beats: on every beat its creator lets others remix (and on your own).
- Captures: Add to Layers on any of your audio.
- My Purchases: Open in Layers on each audio file. It goes through the Marketplace's own download, so it counts as one (and ends the 7-day self-refund window, which it says first).
With no project yet, it starts one named after what you sent ("Late Night + Layers"). With projects, you pick: your current project (the last one you opened), another, or a new one. Layers opens with it on the first empty track.
A new clip goes on the first empty track. The first clip in a project sets the tempo when it knows its own (a TRAX Sound's, or what an upload sounds like); a clip with a different tempo offers Match.
The transport
Play, stop (stop again: back to the top), record, loop, back to the top. The metronome (Click) and its volume, the count-in (off, 1, 2 or 4 bars), the tempo (drag it up or down, Shift for finer steps, double-click to type), the clock in bar.beat.tick, the time signature, the snap grid (1 bar, 1/2, 1/4, 1/8, 1/16 or off) and zoom. On a phone, pinch the timeline to zoom and use two fingers to scroll.
Drag along the ruler to set a loop region; tap the ruler to move the playhead.
Clips
- Drag a clip to move it in time; it snaps to the grid.
- Shift + drag moves it freely (no snap) and onto another track.
- Alt + drag drops a copy.
- Drag its left or right edge to trim; drag the top corners to fade in or out.
- Right-click (a long press on a phone, or More) for: split at the playhead, trim to the selection (the loop region), reverse, normalize gain, time-stretch to the grid (the pitch stays), loop this clip, duplicate, move to the track above or below, clip gain, pitch shift (Pro Studio), rename and delete.
Keys: Space plays and stops, S splits the selected clip at the playhead, Delete removes it, Ctrl+D duplicates it, Ctrl+Z undoes (Ctrl+Shift+Z redoes), Ctrl+S saves, Home goes back to the top.
Tracks
Each track has its name (click to rename), mute, solo, record arm, lock (no accidental edits), a colour, volume with a live meter, pan and effects (Pro Studio). + on a track's header adds an audio track, a Beat Maker layer or a Vocal layer right below it. ⋯ has quantize (every clip on the track onto the grid), duplicate, move up or down, the input it records from, and delete.
Beat Maker and Vocal layers
+ Track (or + Add track) adds an audio track, a Beat Maker layer or a Vocal layer.
- Beat Maker layer: the Beat Maker inside the track. A step grid (kick, snare, clap, hats, tom, perc, crash, 16 steps) with the Beat Maker's kits; tap a step to turn it on. It loops in time with the project for as many bars as you set (1 to 128), from the bar you pick, and any change plays right away. Tap its loops on the timeline (or 🥁 Beat on its header) to open it again. Open in the full Beat Maker copies the beat to the Beat Maker in a new tab, for more room (changes there stay there; Send to Layers brings it back as audio). The Beat Maker plays 60 to 180 BPM: at a tempo outside that, the loop is stretched to fit.
- Vocal layer: a track for takes, armed as soon as you add it. Press Record (or Play): each take lands on it, and the newest plays. Takes stack: the picker on its header chooses which take plays (the takes it overlaps are muted, shown faded). ▶ on its header plays from its take. ≡ opens its lyrics: type or paste the words (they're kept with the track), then Teleprompter shows them big and scrolls them with the song while it plays or records. Open the full Vocal Booth is in its ⋯ menu. Any clip can be muted from its menu too.
Automation (Pro Studio)
A on a track's header opens its automation over the track: Volume, Pan, Filter (a low-pass cutoff, 40 Hz to 20 kHz), Effects mix (how much of the track's effects you hear; it needs an effect on the track first), and the FX send's Space send and Echo send (swell the reverb or the echo in and out). Tap the track to add a point (it snaps to the grid; hold Shift to place it anywhere), drag a point to move it, double-click a point (or long-press it on a phone) to take it out. While you drag, the value shows beside the point. Between points the value moves in a straight line; before the first point and after the last it holds.
A lane is the control itself while it has points: a track with a volume lane follows the lane (its fader rests and says Lane), and the same for pan. Mute and solo still work. Points go in while the project plays and you hear them right away. Clear this lane takes a lane out, and the control goes back to where you set it. A lane holds up to 200 points. Lanes play in exports and stems.
Clip effects (Pro Studio)
Right-click a clip (a long press on a phone) and pick Clip effects to put reverb, delay or a filter on that clip alone: an ad-lib's reverb, a sample's delay. Each has its presets and a mix. They come before the track's own effects, change as you play, and ring out into exports.
You can also drag an effect from a track's effects panel onto another track's header or channel strip to add it there. On a phone (no dragging), pick the track in the panel's Add to and tap the effect.
Record
Arm one or more tracks (●), then press Record or Play: the count-in runs, then each armed track records from its input while everything else plays. Each armed track's meter shows the input level. Takes land as clips where you started, saved to your Captures. Two tracks on the same input get one take, on the first of them. If a take can't be saved to TRAX it downloads to your device so it's never lost.
Arrange, Mixer, Both
Mixing happens inside Layers: there's no separate Mix tool. Toggle the Mixer view in Layers for faders, EQ, compression, panning and the master section. Mixer shows a channel strip for each track (effects, the FX send, pan, fader with its meter, mute and solo) and the master: its fader, the limiter, a stereo meter, and Pro Studio's compressor and 3-band EQ. Both splits the screen, timeline on top and mixer below; drag the line between them. Tab switches between Arrange and Mixer.
FX send: every track can send some of itself (after its fader) to two shared effects, Space (a reverb) and Echo (a delay on the beat, a dotted eighth at the project's tempo). One reverb for the whole song keeps the tracks sounding like they're in the same room. Double-click a send to set it back to none. Sends are on every plan.
Mix check (Mix Intelligence, now inside Layers): Mix check → Check my mix listens to each track on its own and to the whole mix (levels, peaks, where the energy sits) and suggests up to five changes, each saying what to do and why. Nothing changes until you press its button; each has its own Undo. Level and pan fixes work on every plan with Mix checks; EQ, high-pass and reverb fixes use the track's effects (Pro Studio). Each check counts against your plan's daily Mix checks (Supporter 5 a day, Pro Studio 500).
If you made mixes before Mix moved into Layers, the first time you open Layers it offers your latest mix as a new project ("(migrated from Mix)" after its name). The Studio menu's Mix is Layers now. Master stays its own tool, for the final limiter, loudness and export.
Saving
Layers saves by itself every minute when something changed, and keeps the last 20 auto-saves. Save saves now; Versions → Save a version keeps the project under a name (up to 50). In the list: Open any version (what you had stays in undo), Rename a named one, Keep an auto-save under a name so it's kept for good, or ✕ to take one out of the history.
My projects lists every project, the last worked on first: search by name, sort by name, newest or longest, and see which are shared. Put away takes a project off the list (nothing is deleted); the Put away list under the rest brings it back with Restore.
Export
WAV (44.1 kHz, 16-bit) and MP3 (192 kbps) on every plan. Pro Studio adds WAV 48 kHz 24-bit and Stems (every track as its own WAV, zipped). Exports run from the top to the end of the last clip, up to 10 minutes. The metronome never goes into an export; the master's limiter, compressor and EQ do.
Below the downloads, on every plan:
- TikTok cut: pick 15, 30 or 60 seconds and Make the video. You get a 1080x1920 video (your waveform moving over the TRAX pattern, with the project's name and yours) and the same piece as an MP3 for a TikTok sound. It starts at the loop's start when the loop is on, otherwise at the playhead, and runs in whole bars. 10 cuts a day; the download links work for 10 minutes.
- Share link: Make a share link puts your mix on its own page that plays in the browser, no account and no download. Copy link to send it anywhere. Update the mix after changes; Stop sharing closes the page for everyone else. Share pages never show in search. The project's name goes on the page, so it gets the same check as names and bios.
- Sell it on the Marketplace: renders a WAV and opens a new listing with it ready to add (Add it). You set the details and prices there, as with any listing.
- Fan Support drop (when you have Fan Support tiers): send the mix as an MP3 to the fans on the tiers you pick, with a title and a note. It lands in their perks right away, like any perk.
Reference track (Pro Studio)
In the Mixer, under the master: Add a reference and pick a finished song from your audio, or upload one. It plays in step with your project (the same second of it), straight to your speakers: never through your master, never in an export. A is your mix, B the reference (also beside the views at the top). Turn the reference's level down until it sounds as loud as your mix, so you compare the sound, not the volume.
Pro Studio
Effects on every track (reverb, delay, filter, compressor, distortion, chorus, phaser, EQ, bitcrusher), automation lanes, clip effects, a reference track, pitch shift on any clip, the master's compressor and EQ, stems, 48 kHz 24-bit masters and as many tracks as you need. On other plans those show a gold PRO badge.
Related articles
Still stuck?
Search the Help Center, read the FAQ, or contact support. New to TRAX? Start free. A member? Log in to come back here with the full Help Center.
